- Formula
- A = Σ(areaᵢ·αᵢ); Sabine T₆₀ = 0.161·V / A, or Eyring T₆₀ = 0.161·V / (−S·ln(1 − A/S)); V = floor × height, S = 2·floor + perimeter × height
- Output
- s — reverberation time per band
- Bands
- Follows the material α spectra (bands where every material with an area has an α)
- Standard / Source
- General acoustics (no standard cited)
- Access
- Toolbar block
What it does
Predicts a room's reverberation time band by band starting from its surface finishes: you give the room's floor area, perimeter and height, and one row per absorbing material with its area and absorption coefficient α in each band. The block works out the room volume, total surface area and total absorption, then applies the Sabine or Eyring equation (a Method select). Use it for design-stage RT predictions; if you already have the total absorption area per band, use RT from Sabines instead. Ribbon: Buildings → Reverberation → RT from Alpha.
Equation
where Sᵢ and αᵢ are each material's area and absorption coefficient, A_floor the floor area, P the room perimeter and h the room height (S counts walls, floor and ceiling). The block also shows the Total Sabines A and the average absorption coefficient A/S per band in its workings.
A band is only computed when every material with a non-zero area has an α for it; until then that band is left blank (a missing α is never treated as zero absorption). For Eyring, A ≥ S gives 0 s.
Inputs
| Input | Meaning | Unit | Example |
|---|---|---|---|
| Method | Sabine or Eyring | select | Sabine |
| Absorbing materials | N material rows held inside the block (the insert dialog asks only for N, default 3; the rows start blank). Each row holds that material's area (Notes cell) and its α per band (band cells) — type them in, or bind the row to a published variable | m² / — | see below |
| Floor area | room floor area | m² | 10 |
| Room perimeter | room perimeter | m | 20 |
| Room height | room height | m | 2.7 |
Worked example
Floor 10 m², perimeter 20 m, height 2.7 m, so V = 10 × 2.7 = 27 m³ and S = 2 × 10 + 20 × 2.7 = 74 m². Three materials: carpet (10 m²), an acoustic ceiling (10 m²) and plastered walls (54 m²):
| Band (Hz) | 125 | 250 | 500 | 1000 | 2000 | 4000 |
|---|---|---|---|---|---|---|
| Carpet α | 0.05 | 0.10 | 0.25 | 0.40 | 0.55 | 0.60 |
| Ceiling α | 0.45 | 0.65 | 0.80 | 0.85 | 0.85 | 0.80 |
| Walls α | 0.03 | 0.03 | 0.02 | 0.03 | 0.04 | 0.05 |
| Total Sabines A (m²) | 6.62 | 9.12 | 11.58 | 14.12 | 16.16 | 16.70 |
| T₆₀ Sabine (s) | 0.66 | 0.48 | 0.38 | 0.31 | 0.27 | 0.26 |
| T₆₀ Eyring (s) | 0.63 | 0.45 | 0.35 | 0.28 | 0.24 | 0.23 |
(e.g. at 500 Hz: A = 10 × 0.25 + 10 × 0.80 + 54 × 0.02 = 11.58 m²; Sabine 0.161 × 27 / 11.58 = 0.38 s.)
Source
The Sabine and Eyring reverberation equations, with the room model (V = floor × height, S = 2 × floor + perimeter × height) taken from the Timbral reference spreadsheet's “Sabine / Eyring RT from alpha” sections. No specific published standard is cited in the software.