Skip to content
ContentsFormula ReferenceUser guide
Formula Reference

Point Source — Distance Attenuation

Formula
A = −20·log₁₀(r₂ / r₁) + 10·log₁₀(Q)
Output
dB (negative = attenuation)
Bands
Same value at every band
Standard / Source
General acoustics (no standard cited)
Access
Toolbar block

What it does

A point source radiates sound roughly equally in all directions, so its level falls by 6 dB for every doubling of distance (the inverse-square law). This block gives the attenuation between a reference distance r₁ and a receiver distance r₂, plus an optional directivity correction for a source placed against one or more reflecting planes. Because it is purely geometric, the result is the same at every frequency band.

Equation

A=20 log⁡10 ⁣(r2r1)A = 20\,\log_{10}\!\left(\frac{r_2}{r_1}\right)

The value is written as a negative number, because it is an attenuation (see the sign convention on the home page). The directivity term 10·log₁₀(Q) is then added, so the block's result is −20·log₁₀(r₂/r₁) + 10·log₁₀(Q). Q = 1 (Spherical, the default) adds 0 dB; Hemispherical Q = 2 adds 3.0 dB, Quarter-spherical Q = 4 adds 6.0 dB, Eighth-spherical Q = 8 adds 9.0 dB.

Inputs

InputMeaningUnitExample
r₁reference distancem1
r₂receiver distancem10
Qdirectivity (Spherical / Hemispherical / Quarter-spherical / Eighth-spherical)—Spherical

Worked example

With r₁ = 1 m and r₂ = 10 m:

A=20 log⁡10 ⁣(101)=20×1=20 dBA = 20\,\log_{10}\!\left(\tfrac{10}{1}\right) = 20 \times 1 = 20\ \text{dB}

→ −20.0 dB at every band from 31.5 Hz to 8 kHz (Q = Spherical adds 0 dB; with Hemispherical it would be −20.0 + 3.0 = −17.0 dB).

💡 A halving/doubling check: 10× the distance is about 3.3 doublings, and 3.3 × 6 dB ≈ 20 dB.

Source

The standard geometric-divergence (inverse-square) relationship for a point source. No specific published standard is cited in the software for this identity.

Register interest

Tell us a little about you and we'll be in touch when Timbral is ready.