Skip to content
ContentsFormula ReferenceUser guide
Formula Reference

Plane Source — Distance Attenuation

Formula
Near 0 · Line 10·log₁₀ · Point 20·log₁₀
Output
dB (negative = attenuation)
Bands
Same value at every band
Standard / Source
General acoustics (no standard cited)
Access
Toolbar block

What it does

A finite radiating plane — a large facade, a big louvre, a radiating panel — behaves differently depending on how far away you stand relative to its size. The block uses the two plane dimensions (a = smaller side, b = larger side) to switch between three regimes:

  • Near field (r < a/π): you are close enough that the level barely changes with distance (≈ 0 dB).
  • Mid field (a/π ≤ r < b/π): the plane behaves like a line source — 3 dB per doubling.
  • Far field (r ≥ b/π): the plane behaves like a point source — 6 dB per doubling.

The transition distances are therefore a/π and b/π. The result is the same at every frequency band.

Inputs

InputMeaningUnitExample
r₁reference distancem1
r₂receiver distancem10
a (width)smaller plane dimensionm5
b (length)larger plane dimensionm10

Worked example

With a = 5 m and b = 10 m, the transitions fall at a/π = 1.59 m and b/π = 3.18 m. A receiver at r₂ = 10 m is well into the far field, so from r₁ = 1 m:

→ −13.0 dB (−12.95 dB before rounding to one decimal place) at every band from 31.5 Hz to 8 kHz.

(The loss is less than the −20 dB a true point source would give over the same distances, because part of the range is spent in the gentler near/mid regimes.)

Source

Standard finite-plane divergence model (near / line / point regimes). No specific published standard is cited in the software.

Register interest

Tell us a little about you and we'll be in touch when Timbral is ready.