- Formula
- Lowest NC curve not exceeded in any octave band 63 Hz – 8 kHz
- Output
- NC value (e.g. NC-35), or NC undefined outside NC-15 … NC-70
- Bands
- 63 Hz – 8 kHz (octave; 1/3-octave input is summed to octaves first)
- Standard / Source
- General acoustics (no standard cited)
- Access
- Toolbar block, Inline =function
What it does
Rates a measured or predicted octave-band spectrum against the Noise Criterion (NC) curves, the single-number rating widely used for building-services noise. The rating is the lowest whole-number NC curve that the spectrum does not exceed in any band from 63 Hz to 8 kHz. Use it from the Ratings ribbon, or type it into a cell as =NCRATING(E5:M5, 31.5).
How it is rated
- A band level equal to the curve does not exceed it (the classic tangency rating). Levels are compared to 0.1 dB.
- Blank and zero bands are not rated, so a partial spectrum rates on the bands it has. 31.5 Hz is outside the NC curves.
- A 1/3-octave row is energy-summed to octave bands first.
- A spectrum below NC-15 in every band, or above NC-70 in any band, reads NC undefined: Timbral does not clamp it to NC-15 or NC-70 and does not extrapolate.
ℹ️ The curves. NC curves are published at 5 dB steps (NC-15, NC-20 … NC-70). The intermediate whole-number curves are linearly interpolated between them, as tabulated in Timbral's reference data, so a rating can land on any whole number between NC-15 and NC-70. The same curves fill a row from Curves › NC.
| Curve | 63 | 125 | 250 | 500 | 1000 | 2000 | 4000 | 8000 |
|---|---|---|---|---|---|---|---|---|
| NC-15 | 47 | 36 | 29 | 22 | 17 | 14 | 12 | 11 |
| NC-20 | 51 | 40 | 33 | 26 | 22 | 19 | 17 | 16 |
| NC-25 | 54 | 44 | 37 | 31 | 27 | 24 | 22 | 21 |
| NC-30 | 57 | 48 | 41 | 35 | 31 | 29 | 28 | 27 |
| NC-35 | 60 | 52 | 45 | 40 | 36 | 34 | 33 | 32 |
| NC-40 | 64 | 56 | 50 | 45 | 41 | 39 | 38 | 37 |
| NC-45 | 67 | 60 | 54 | 49 | 46 | 44 | 43 | 42 |
| NC-50 | 71 | 64 | 58 | 54 | 51 | 49 | 48 | 47 |
| NC-55 | 74 | 67 | 62 | 58 | 56 | 54 | 53 | 52 |
| NC-60 | 77 | 71 | 67 | 63 | 61 | 59 | 58 | 57 |
| NC-65 | 80 | 75 | 71 | 68 | 66 | 64 | 63 | 62 |
| NC-70 | 83 | 79 | 75 | 72 | 71 | 70 | 69 | 68 |
Inputs
| Input | Meaning | Unit | Example |
|---|---|---|---|
| Lp | sound pressure level spectrum, octave bands 63 Hz – 8 kHz (a row) | dB | see below |
Worked example
| Band (Hz) | 63 | 125 | 250 | 500 | 1000 | 2000 | 4000 | 8000 |
|---|---|---|---|---|---|---|---|---|
| Lp (dB) | 55 | 48 | 40 | 35 | 30 | 28 | 25 | 22 |
| NC-30 (dB) | 57 | 48 | 41 | 35 | 31 | 29 | 28 | 27 |
The spectrum touches NC-30 at 125 Hz and 500 Hz and is below it everywhere else; the next curve down already lies below 48 dB at 125 Hz, so the rating is NC-30.
Source
The Noise Criterion (NC) curves, NC-15 to NC-70 in 5 dB steps, octave bands 63–8000 Hz; intermediate curves linearly interpolated as described above.